| |
T-6101 Aluminum Brightener |
| |
- Aluminium cleaners
- Weak acid system, yellow smoke free in the process
- Diluted with water 1: 10-50
- PH about 1.0
- Room temperature application, the reduction of energy costs |
| |
T-6101F Aluminum Detergent |
| |
- Aluminum Detergent
- Weak acid system, yellow smoke free in the process
- Diluted with water 1:10-50
- PH about 1.0
- Room temperature applicaion, reducing energy cost
|
| |
T-6101BR Non-ferrous Detergent |
| |
- Nonferrous metals and alloys Bright Cleaner
- Weak acid product system, yellow smoke free in the process
- Concentration (concentrated or diluted), safety and environmental protection, not harm the human body
- PH about 1.0
- Application temperature 20-30 ° C, reducing energy cost
|
| |
T-6101M Magnesium Alloy Detergent |
| |
- Magnesium Alloy Detergent
- Weak acid system, yellow smoke free in the process
- Diluted with water 1:10
- PH about 1.0
- Special design for magnesiun alloy, need to application withT-6107M, T-2050M |
| |
T-6101FE Ferrous Rust Remover |
| |
- For removing ferrous rust(casting should be tested before use.)
- Weak acid system, free of HNO3, HF, HCl, yellow smoke free in the process
- Diluted with water 1:3, no harm to human (add 30% HCL after diuting, will spped the reaction)
- Process: rust remover-rinse-rinse-ultrasonic cleaning-rinse-rinse-rust proofed rinse
- PH about 1.0
- Application temperature 20-30 ° C, reducing energy cost |
| |
T-6101CU Copper Rust Remover |
| |
- Copper rust remover
- Weak alkaline system, do not damage the plating layer
- Application with original concentration
- PH about 9.0
- Application temperature 20-30 ° C, reducing energy cost |
| |
T-6101HR Hand rust remover |
| |
- Removing rust of ferrous metal, for manual or soaking
- Weak acid formula, free of HNO3, HF, HCl
- Use as if, safe & environmentally friendly, no harm to human
- PH about 1.0
- Room temperature application
- After rinsing, should be rinsing with T-6704 in next bath |
| |
T-6101FS Acid Brightener |
| |
- Is formulated for removal of corrosion and oxidation from non-ferrous surface
- Especially aluminum products, it restores the luster to aluminum surfaces and leaves them bright and clean
- Concentration, diluted with water 1: 20-50
- PH is about 1.0
- Application temperature 10-30 ° C, saving energy
|
| |
T-6101BC Ball Carbon Rust Remover |
| |
- Ball carbon casting rust remover
- Weak acid system, non-smoking in the process
- Diluted with water 1: 20-50
- PH is about 1.0 |
| |
T-6101NF Forging Alumium Detergent |
| |
- Aluminum oxidition remover for forging parts
- non-smoking in the process
- Dilution according to use as
- PH is about 1.0
- Application temperature 40-60°C |
| |
T-6101HC Ferrous Descaling Agent |
| |
- Removing scale and rust from ferrous
- non-smoking in the process
- Dilution according to use as
- PH is about 1.0
- Application temperature 40-60°C |
| |
T-2201CP Copper Chemical Polishing Agent |
| |
- Completely free of chromium and nitrate
- Alternative electrochemical polishing, use in 40-50 ℃
- Non-smoking in the process, mirror effect
- Removes oxide films and weld defects |
| |
T-2201BR Brass Chemical Polishing Agent |
| |
- Completely free of chromium and nitrate
- Alternative electrochemical polishing, use in 40-50 ℃
- Non-smoking in the process, mirror effect
- Removes oxide films and weld defects |
| |
T-2202CP Copper Chemical Polishing Agent |
| |
- Alternative electrochemical polishing, use in room temperature
- Non-smoking in the process, mirror effect
- Removes oxide films and weld defects |
| |
T-2202BR Brass Chemical Polishing Agent |
| |
- Alternative electrochemical polishing, use in room temperature
- Non-smoking in the process, mirror effect
- Removes oxide films and weld defects |
| |
T-2201AC Copper Alloy Brightener |
| |
- Free of nitric acid and heavy metals
- Application after chemical polishing
- Can be use as PH adjusting agent
|
| |
|
| |
|
